11 Hot Air Balloon Craft For Kids Hot air balloons are one of the most popular crafts for kids to make, and they’re also a great way to learn about outer space.
Whether it’s learning about how hot air balloons work or designing them on your own, there are tons of awesome ideas out there.
Here are 11 hot air balloon crafts for kids that will make you want to get started right away!
3D Hot Air Balloons Made From Paper Cups
Cut the bottom off of a paper cup, then cut it in half.
Paint the two halves and let them dry completely before moving on to step 3.
Cut a 12-inch piece of ribbon and glue it across the top of one of your painted paper cups, wrapping around tightly as you go so that no part of the cup is exposed once it’s tied up (or else this will be an easy place for your balloon to pop).
Cut a strip from craft foam in whatever length seems appropriate for your child (we used about 18 inches), wrap it around the middle part of their chest like an armband, then tie on with tape or ribbon if desired (we used solid red yarn);
make sure that there’s enough room for their arms inside! If using yarn, snip one end off so there are still pieces sticking out on either side; these will be used later on as handles when we assemble our finished project into something resembling a hot air balloon basket!
Glue googly eyes onto either side where they face upward toward each other at opposite ends; we found that 2 pairs worked best but feel free to experiment here too! You could also use pom poms instead—they’re easy peasy since all you need are some scissors & glue!
Dangling Hot Air Balloon Craft
- Use a balloon and a balloon pump
- Use a balloon and a straw
- Use a balloon and a piece of string
- Use a balloon and a piece of yarn
- Use a balloon and a piece of ribbon or elastic band
Use Paper Plates for Hot Air Balloons
Using colored paper plates, you can create a hot air balloon for your child to play with.
First, punch a hole in the middle of each plate (if you don’t have a hole punch, use scissors).
Next, attach two identical plates together by sliding one plate inside the other; both sides should be facing out.
Finally, use a straw and blow up all four sides of your newly crafted hot air balloon!
Turn Your Kids Into Pinocchio Characters in Hot Air Balloons
- Cut a paper plate into the shape of a hot air balloon.
- Glue on a balloon, using glue-stick or white glue.
- Draw on the balloon to make it look like Pinocchio (or any other character).
Utilize Recycled Bottles to Create Adorable Hot Air Balloons
This project is a fun and easy way to craft with your kids. The best part? You can use any shape or size of bottle as long as it has a relatively large opening,
making this project great for using up any leftover drink bottles in your home. After they’re all painted, it’s a great way to teach your child about recycling!
To make it even more fun, try adding some character balloons by painting them in bright colors or even decorating them with stickers. You can also create one that looks like a cat!
If you don’t want to get crazy with the paint and watercolors, just spray paint over the existing label on each bottle (or simply remove it). It’s super simple and completely customizable!
Paper Bag Hot Air Balloon Crafts
- Take one or two paper bags and cut them to shape.
- Decorate each bag using paint, stickers, ribbons, and glitter. You can also use markers or crayons if you want your hot air balloon to look colorful!
- Glue the top of the balloon shut with glue so that it doesn’t open up when you inflate it with air!
Create a Colorful Hot Air Balloon with Pipe Cleaners
This is another simple hot air balloon craft for kids. You can use a variety of colors to create a rainbow-like hot air balloon or you can use two colors to create a hot air balloon that looks like a clown.
To make the rainbow-like hot air balloon, cut several pieces of pipe cleaners and wind them around your finger. Then twist the ends together to form an eyelet shape at the top center of your creation. Let it dry so it stays in place while you work on the next step!
For each color, you would like to include in your design (we suggest 3), cut out 4 pieces from that color and tape them onto your dried piece with blue painter’s tape or masking tape (if necessary).
Once all of your pieces have been added, remove all but one piece of tape—this will help keep everything in place while attaching them together!
Have Fun with Clay When Making a Hot Air Balloon Craft
Using clay, you can make a hot air balloon craft. Start by making the basket of your hot air balloon out of a straw.
Use another straw to blow up the balloon and keep blowing until it reaches its peak height. Then, use some more clay and create an anchor shape at the bottom of your balloon.
Now that you have your basic hot air balloon shape, take some clay and make two tails on either side of your craft: one short tail for yourself and one long tail for yourself!
Create an Enchanting 3D Skeleton Inside a Marquee Hot Air Balloon Tutorial
This craft is perfect for Halloween. It’s also great for kids who are interested in anatomy, so if you have a budding doctor or nurse on your hands, this is a fantastic project.
Materials:
- 3D skeleton template (printable)
- Black cardstock paper (1 piece)
- Hot Air Balloon Template (printable)
- Glue gun and glue sticks (1 glue gun, 1 stick per person/child) OR double-sided tape
- Paintbrush with thin bristles and black paint
How to make it: Print out the template sheets provided above onto heavy-duty paper or cardstock. Cut out the templates of choice using scissors or an X-Acto knife. Set aside for later use as well as any leftover pieces of paper from cutting those shapes out!
Next, take one large square piece of black cardstock paper and fold it into quarters horizontally then vertically so that there are four sections total once unfolded again;
two along each edge with one blank side facing outward toward yourself when folded up again after being folded originally four times over the first time around before folding back down flatly again so that all creases line up neatly together without any gaps between them where light could get trapped inside which would spoil visibility during nighttime viewing activities like camping trips under moonlit skies -or even better yet meteor showers!
Place glue dots along perimeter edges first then apply a small amount directly onto the center area right next door neighbor spot within each quadrant area too before placing the hot air balloon template face down onto them both simultaneously pressing firmly down slowly while pulling away slightly at the same time until secure but not too tight!”
Make a Purple Lantern That Looks Like a Hot Air Balloon!
This is a fun kids’ craft that you can make with your child. The materials are easy to find, and it will be quite the conversation piece once they’re done!
To begin, use your balloon pump to inflate a purple balloon. Then, use the ruler to mark dots in each corner of the paper plate—these will be where you want your lantern handle supports to go.
Next, cut out strips of construction paper that match either side of each dot on your plate (they should measure about 2 inches wide). You can also add some other shapes if you like—hearts or stars would look great!
Now glue those two pieces onto opposite sides of the lantern before inflating it with air again (putting holes in the first).
Put another glob of glue on one end of each strip and fold over so that there is an extra bit between them; then seal both ends together well with more glue until it feels sturdy enough not to break apart when holding up against weight later on.[3]
Make Your Own 3D Gold and Blue Hanging Lanterns! (via SMP)
This craft is perfect for anyone who loves lanterns. It’s also a fun project to do with kids because it will help them develop their fine motor skills and teach them how to use scissors correctly.
This is a great craft idea because you can make several lanterns with one balloon.
The best part of this craft is that once you’ve finished making the hanging lamps, they can be used as decorations in your home in addition to being hung from the ceiling! To make these hanging lamps, all you need are some tissue paper and paint.
First, cut out two circles using a hole punch or cookie cutter. Then paint both sides of each circle with blue acrylic paint (you could also use glitter if you want).
Finally, glue together the two pieces of tissue paper so that one side has blue tissue paper on top and the other side has blue tissue paper underneath; repeat this process until there are three layers on each side of your lamp (or more layers if desired). When done painting let dry then hang!
All These Hot Air Balloon Crafts Are Great To Make With Your Kids
Hot air balloons are fun to make and a great way to spend time with your kids.
They’re also a great way to get creative, as you can use recycled materials and clay for this project.
All these hot air balloon crafts are great for children 2-5 years old, but all ages will enjoy making them!
hot air balloon craft ideas
Hot air balloon craft ideas can be a wonderful way to engage in creative and fun projects. Here are some hot air balloon craft ideas for you to explore:
- Paper Hot Air Balloon: Create a colorful paper hot air balloon using construction paper or cardstock. Cut out the shape of a balloon, decorate it with markers, paints, or stickers, and attach a basket made from a small paper cup or cardboard.
- Balloon Mobile: Craft a hot air balloon mobile by making multiple smaller balloon shapes using colored paper or felt. Hang them from a hoop or string, creating a delightful display that moves with a gentle breeze.
- Recycled Material Balloon: Utilize recycled materials such as plastic bottles or cups to create the structure of the hot air balloon. Decorate the outside with paint or patterned paper, and attach a basket made from woven string or small containers.
- Fabric Hot Air Balloon: Sew or glue together fabric pieces in the shape of a balloon, stuffing it lightly to give it a three-dimensional appearance. Add details like ribbons, bows, or buttons for a charming touch.
- Clay or Playdough Balloon: Sculpt a hot air balloon out of modeling clay or playdough, shaping the balloon and basket separately. Paint or decorate the clay before allowing it to dry or harden.
Remember to have fun and personalize your hot air balloon crafts with colors, patterns, and additional embellishments. These crafts can be a fantastic way to explore your creativity and celebrate the whimsical beauty of hot air balloons.
hot air balloon ideas, 11×17, diy hot air balloon, preschool, diy, craft diy, kids boys, kid’s, 11am, 11pm, kid, air craft, heated air, a kids, kids craft
Conclusion
These hot air balloon crafts are great to make with your kids. They’re easy to create and are sure to keep them entertained!
